GST LC200 Intelligent Adresli Loop Kartı “1 Loop”
Loop kartı GST200
GST firması tarafından üretilen loop kartı GST200 panelin loop unu
1.looptan 2.loopa yükseltir.panel bu durumda 2 loop olur.
326,00 $ +KDV
Loop kartı GST200
GST firması tarafından üretilen loop kartı GST200 panelin loop unu
1.looptan 2.loopa yükseltir.panel bu durumda 2 loop olur.
Loop kartı GST200 LC200
GST firması tarafından üretilen loop kartı GST200 panelin loop unu
1.looptan 2.loopa yükseltir.panel bu durumda 2 loop olur.
Connecting with loop devices
Add one loop to connect 242 addressable devices
Özellikler
1) LC200 Loop Board is an optional card for GST200
Series Control Panels, used to extend additional
detection loops for connecting more devices with the
system. GST LC200
2) One card is only used in the control panel; it shouldn’t
be inserted and removed when it is energized.
3) View registered devices (select the menu according
to type of a control panel)
View Menu
BROWSE->
1 Browse Devices ->
1 Loop Devices -> Loop1
Loop2
Press up and down keys to select and press Enter to
view.
or
BROWSE->
1 Loop Browse -> Loop1
Loop2
Press up and down keys to select and press Enter to
view.
or
MODE->
1 Read Status ->
2 System Point -> 1.Loop1
2.Loop2
Press number 1 or 2 to review the related content. GST LC200
4) LEDs
a) HL1 LED: Red. It is lit when switching between loops.GST LC200
b) HL2 LED: Red. It is lit when input of loop is interrupted.
c) HL3 LED: Red. It is lit when communicating with main board.
Gulf Security Technology Co., Ltd.
Certificate No 548p to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006
Intelligent 1 Loop, 30 Zone Analogue Addressable Control and Indicating
Equipment (Hungarian Varient)
Incorporating the following units:
MB-220/ F7.820.826 Main board
SB-220/ F7.820.827 Switch board
TB-220/ F7.820.828 Loop interface board
PS-220/ F7.820.829b Power supply unit
ZP-220/ F7.820.312d Zone indication and intervention board
Incorporating as optional modular units:
P-9930/ F7.820.913a RS-232 board for configuration
P-9901A Printer module kit
LC200/ F7.820.1125 Loop board (for loop expansion)
Certified with the following options with requirements from EN 54 part 2:
7.8 Output to Fire Alarm Devices
7.10.1 Output to automatic Fire Protection Equipment Type A
7.11 Delays to outputs
8.3 Fault signals from points
9.5 Disablement of addressable points
Note: Can be extended to 2-loop panel by adding LC200
Değerlendirmeler
Henüz değerlendirme yapılmadı.