GST Yangın 200-2-2 Intelligent Adresli Yangın Algılama Paneli 2 loop

gst200-2-2

GST Yangın 200-2-2 Intelligent Adresli Yangın Algılama Paneli 2 loop

  • Açıklama
  • Yorumlar (0)
  • Teknik Özellikler
  • Dökümanlar

Açıklama

GST 2 loop Int.Adresli Yangın Algılama Paneli
GST Yangın 200-2-2

Özellik
8 x Loop (242) kapasite (1936) adresli puan
Son derece iyi değerde bir yüksek kaliteli bir çözüm sağlayarak, genellikle küçük sistemler ile ilişkili olmayan özellikleri ile doludur İki döngü adresli yangın algılama paneli,
Döngü kapasitesi 477 akıllı cihazlar
30 mantıksal yapılandırılabilir bölgeleri
PAS ve Onaylama Fonksiyonu
Yinelenen adres raporu
Uyuşmazlığı cihaz türü raporu
Kirli Dedektör Raporlama
One Man Test Fonksiyonu
Grafik LCD Ekran
Bölge göstergesi ve manuel müdahale paneli
Net-çalışılabilir tüm GST akıllı yangın panelleri ile
PC’den Programlanabilir
Dahili RS485 tekrarlayıcı çıkış (Maksimum 10 tekrarlayıcı)
İsteğe bağlı GMC grafik istasyonu
Opsiyonel Paneli Yazıcı
‘Bulanık Mantık’ dahil Gelişmiş kullanıcı dostu programlama yazılımı
yeniden programlama Opsiyonel koruma
LPCB Onaylı

Teknik Özellikler
Standart: EN54 Parça 04/02
Onaylar: LPCB, CE
Ana Giriş Gerilimi: 220/230 VAC (+ 10 / -15%) 50/60 Hz
Giriş Current Rating: 0.5A
Sistemi İşletim Gerilimi: 24 VDC Nominal
Döngü Kapasite: Döngü 1: 235; Döngü 2: 242
Çıkışlar (3):
Yangın Alarm Çıkışı: 500mA / 24Vdc / NO-NC
F.P.E. Çıkış: 500mA / 24Vdc / NO-NC
Siren Devresi Çıkış: 500mA / 24Vdc / NO-NC
Boyut: (YGD) 580 x 420 x 202 mm

İncelemeler

  1. 5 out of 5

    GST Yangın 200-2-2 Intelligent Adresli Yangın Algılama Paneli 2 loop


Yorum yap

 Standard EN54 Part 2/4 ; BS5839 Part 4
 Approvals LPCB, CPD
 Main Input Voltage 220/230 ± 10% VAC 50/60 Hz
 Input Current Rating 0.500A, Fuse: 2A delay
 Operating Temperature 0°C- 40°C /95% relative humidity
 Protection IP 30
 Application Indoor installation
 Programming Laptop using GST Defining Software/P-9930
 Zone Capacity 30 Zones programmable
 Loop Parameter 1 loop expandable to 2 with LC200 card
Loop Capacity 477; Loop 1:235; loop 2:242(Address)
Loop Topology Class A or B
Loop Voltage 24 VDC Nominal (21-27 VDC)
Loop Current 0-300mA
Loop Length/Cable 1.00mm²-800m-Full Load / 1.5mm²-1000 m-Full Load

 Output Circuits
Fire Alarm Output: Monitored (4.7Kohm)
Voltage: Standby: -9to-11VDC; Alarm: 21 to 27Vdc
Current: 500mA
Relay Contact: NO/NC Jumper Setting; rating: 24V/1A
F.P.E. Output: Monitored (4.7Kohm)
Voltage: Standby: -9to-11VDC; Alarm: 21 to 27VdcCurrent: 500mA
Relay Contact: NO/NC Jumper Setting; rating: 24V/1A
Sounder Circuit Output: Monitored (4.7Kohm)
Voltage: Standby: -9to-11VDC; Alarm: 21 to 27Vdc
Current: 500mA
Relay Contact: NO/NC Jumper Setting; rating: 24V/1A
(Output circuit cable length: 1.00mm²- 1000m)
Fault Output: Non-monitored
Relay Contact: NO/COM/NC; rating: 24V/1A
 Fuses
Mains 2A (20mm A/S ceramic)
Sounders (2): 1A (20mm A/S)
Fire alarm Output 0.5A (20mm A/S)
Battery: 2A (20mm A/S HRC ceramic)

 Standby Batteries
Twin 12 VDC Bat; 21AH as per load calculated
Maximum Charge Current: 1.2
Maximum Charge Voltage: 27.6
Type: Sealed lead acid batteries
Recommended model: Power-Sonic PG12V21
Maximum Internal Resistance: 1Ω
Quiescent Current under Full-loaded Condition: 0.75A
Maximum Battery Operating Current: 2.82A

 RS485 Port
Repeater Output: Up to 10 Repeater or Mimic panel
Cable length: 1.5mm²- 1000m
Optional Network card (P-9940A): Normal 32 panels (GST200/2); 64
with IFP8
Cable Length: 1.5mm²- 1200m between panels
Topology: Class A

 CANBUS
Optional CANBUS Communication card (P-9960)
Network Capacity 240 panels (CANBUS HUB Required)
Cable Length: 3Km
Topology: STAR Connection

 RS232 Port (Serial/USB)
Optional Communication card (P-9930)
Cable Length: 15m (cable/flat ribbon Supplied)

 Panel Printer
Optional Printer (P-9901A)
Type: Thermal/ASCII Code/96 Characters
(Flat ribbon cable supplied) Voltage: 5Vdc

 Dimension (HLW)
Outer: 580 x 420 x 30 mm
Inner: 550 x 393 x 173 mm

Down